Monitor question

Maintenance, accessories, operation. Anything to do with making your erg work.

Monitor question

Postby ffrink23 » January 21st, 2018, 3:20 pm

I picked up a used model c with damaged-from-battery-leakage PM2+ monitor. Plan to try cleaning the board. I hooked up the model c sensor plug end into my PM5 but it does not register activity. Should the signal from the pm2 pickup be read by the pm 5 or are they not compatible? Looking for a used monitor in the meantime, but I may need to order a pickup sensor. Thanks
ffrink23
Paddler
 
Posts: 23
Joined: January 21st, 2011, 10:27 am

Re: Monitor question

Postby Carl Watts » January 21st, 2018, 3:46 pm

You need to configure the PM5 to work with the Model C pickup, search this forum its a hidden menu.
Carl Watts.
Age:50 Weight: 98kg Height:183cm Body fat:20%
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
User avatar
Carl Watts
Half Marathon Poster
 
Posts: 2778
Joined: January 8th, 2010, 4:35 pm
Location: NEW ZEALAND

Re: Monitor question

Postby Citroen » January 21st, 2018, 4:20 pm

Docs here: http://www.concept2.com/service/monitor ... stuck-zero for getting the model setting correct.
User avatar
Citroen
SpamTeam
 
Posts: 5187
Joined: March 16th, 2006, 3:28 pm
Location: Basingstoke, UK

Re: Monitor question

Postby ffrink23 » January 21st, 2018, 4:34 pm

Thank you
ffrink23
Paddler
 
Posts: 23
Joined: January 21st, 2011, 10:27 am

Re: Monitor question

Postby bob01 » February 7th, 2018, 12:10 pm

Yeah mine was the same ... as indicated one needs to change on the PM5
bob01
500m Poster
 
Posts: 91
Joined: February 7th, 2018, 10:59 am


Return to Indoor Rowers

Who is online

Users browsing this forum: No registered users and 3 guests

cron