Drive issue on skierg

Talk about the ski ergometer and training tool from Concept2

Drive issue on skierg

Postby Grig » December 21st, 2016, 2:08 am

Hello everyone, I bought a skierg pm5 last Christmas from rogueeurope.eu. I don't work a lot on him ,I just do intervals training so the skierg it's almost new.I never had a problem until yesterday when the left arm on the driving phase just fall like he has no tension.I check the pulls and the bungees as I read in the manual and they look OK. I'ts not regular, it's just happen from time to time, but I almost injured myself because is very suprising when it comes in max effort.first I saught I don't coordinate myself with the Wright arm but when I use only the left it happens again so it isn't that.the Wright pulley work just fine.if somebody meet the same issue or know what can be rong please write to me or email.thanks a lot
Grig
Paddler
 
Posts: 2
Joined: December 20th, 2016, 4:46 pm

Re: Drive issue on skierg

Postby dr3do » December 27th, 2016, 3:28 pm

I guess you'll need new drive spools.

http://www.concept2.com/service/skierg/ ... eplacement
Boris (Bike/SkiErg/RowErg/Run)
User avatar
dr3do
Paddler
 
Posts: 37
Joined: January 8th, 2015, 5:12 am
Location: Switzerland

Re: Drive issue on skierg

Postby Grig » December 27th, 2016, 10:29 pm

Hy,
Thanks for answering. ..I wrôte to the concept 2 and they said they are sending me a pairs of clutches. ..àpparently the problème came from there...and I m not the only one with this issue...thanks once again
Grig
Paddler
 
Posts: 2
Joined: December 20th, 2016, 4:46 pm


Return to Concept2 SkiErg

Who is online

Users browsing this forum: Google [Bot] and 1 guest