BikeErg PM5 output power via ANT+ (for use w/Sufferfest)

Discuss all things related to the BikeErg, Concept2's newest product.

BikeErg PM5 output power via ANT+ (for use w/Sufferfest)

Postby TM900 » January 24th, 2018, 4:10 pm

Does the PM5 have the ability to output power (watts) via any of the ANT+ options in firmware version 319? I am trying to use my BikeErg with Sufferfest and I can get the Speed/Cadence data to output fine, but no luck outputting power. I have tried all 3 versions of ANT+ and have had no success. Not sure if it's possible with the current firmware or (hopefully) a future option?
TM900
Paddler
 
Posts: 2
Joined: January 24th, 2018, 3:51 pm

Re: BikeErg PM5 output power via ANT+ (for use w/Sufferfest)

Postby wyattwyatt » February 7th, 2018, 11:46 pm

i am using my bikeerg with v. 319 almost every day with zwift.
zwift picks up cadence and power (watts) from the pm5.
had to put an ANT receiver in a USB slot of my windows PC - had an old garmin that works fine.

values zwift reports are consistent with the values the pm5 reports.

works well!
joseph b wyatt
http://jbwyatt.com
wyattwyatt
500m Poster
 
Posts: 61
Joined: June 26th, 2010, 3:56 am
Location: clarion, pa

Re: BikeErg PM5 output power via ANT+ (for use w/Sufferfest)

Postby CodyMA » February 12th, 2018, 10:19 am

I had issues with Sufferfest on IOS but changed the connection on the PM5 to ANT+ FE-C. Cadence and Power both show now.
CodyMA
Paddler
 
Posts: 2
Joined: February 12th, 2018, 10:13 am


Return to Concept2 BikeErg

Who is online

Users browsing this forum: No registered users and 1 guest