Need to Rediscover Suunto Monitor After Each Shut Down

SFR · Post by **SFR** » January 30th, 2009, 9:30 am

My PM4 needs to rediscover my Suunto Monitor each time I start it up. Is there any way to save the monitor so it doesn't have to be rediscovered through the menu options each time?
Thanks

Citroen · Post by **Citroen** » January 30th, 2009, 12:09 pm

Use a LogCard and it will record the serial number from your Suunto belt so you don't have to pair it every time the monitor shuts down.

SFR · Post by **SFR** » January 30th, 2009, 12:13 pm

Thanks. I have a log card but am using Row Pro. Should I just leave the log card in?

Citroen · Post by **Citroen** » January 30th, 2009, 2:47 pm

SFR wrote:Thanks. I have a log card but am using Row Pro. Should I just leave the log card in?

Don't know, don't have RowPro and I've lost my Suunto HR belt.

Set up the Suunto and row with the USB disconnected to get the stuff on your LogCard. They try it with RowPro with the LogCard left in. RowPro does have support for reading LogCard data.

If it works - good. If it doesn't post on the http://digitalrowing.com forum where the RowPro folks live.

SFR · Post by **SFR** » January 30th, 2009, 2:58 pm

Thanks.