Clean or black seat rollers

Maintenance, accessories, operation. Anything to do with making your erg work.
Post Reply
User avatar
Rowan McSheen
2k Poster
Posts: 262
Joined: December 13th, 2014, 6:33 pm
Location: Cornwall, UK

Clean or black seat rollers

Post by Rowan McSheen » June 20th, 2022, 6:48 am

I wipe down the monorail before and after each use and also clean the seat rollers. The erg is a few months old now and the rollers are still as white as new. But the ride seems more prone to clicks and bumps than my old machine, whose rollers I never cleaned. A stray speck of dandruff feels like a boulder.

It's not a massive issue but I wonder -- if I let the rollers accumulate cruft, does that make for a smoother ride?
Stu 5' 9" 175 lb (give or take a few) born 1960

gvcormac
1k Poster
Posts: 119
Joined: April 20th, 2022, 10:27 am

Re: Clean or black seat rollers

Post by gvcormac » June 20th, 2022, 9:54 am

I don't think it is all that likely given C2's quality control, but maybe the bearings weren't lubricated properly from the factory. If you turn the monorail upside down you can try to spin the rollers and see how they sound. They can be replaced but you need to take the end cap off the monorail. Maybe you could squirt some chain oil in, if that turns out to be the problem.

Joebasscat
500m Poster
Posts: 63
Joined: February 14th, 2020, 10:05 pm

Re: Clean or black seat rollers

Post by Joebasscat » June 20th, 2022, 10:46 am

Rowan McSheen wrote:
June 20th, 2022, 6:48 am
I wipe down the monorail before and after each use and also clean the seat rollers. The erg is a few months old now and the rollers are still as white as new. But the ride seems more prone to clicks and bumps than my old machine, whose rollers I never cleaned. A stray speck of dandruff feels like a boulder.

It's not a massive issue but I wonder -- if I let the rollers accumulate cruft, does that make for a smoother ride?
I’d say letting them accumulate cruft is a no go. Sorry you are experiencing the issue.
63 5’-11” 74kg

Dangerscouse
Marathon Poster
Posts: 7239
Joined: April 27th, 2014, 11:11 am
Location: Liverpool, England

Re: Clean or black seat rollers

Post by Dangerscouse » June 20th, 2022, 2:48 pm

Rowan McSheen wrote:
June 20th, 2022, 6:48 am
It's not a massive issue but I wonder -- if I let the rollers accumulate cruft, does that make for a smoother ride?
Not sure what the issue is, but I'd guess that it will become notably worse if you don't clean them.

What cleaner are you using.
48 HWT; 6' 4"; 1k= 3:09; 2k= 6:36; 5k= 17:19; 6k= 20:47; 10k= 35:46 30mins= 8,488m 60mins= 16,618m HM= 1:16.47; FM= 2:40:41; 50k= 3:16:09; 100k= 7:52:44; 12hrs = 153km

"You reap what you row"

Instagram: stuwenman

User avatar
Rowan McSheen
2k Poster
Posts: 262
Joined: December 13th, 2014, 6:33 pm
Location: Cornwall, UK

Re: Clean or black seat rollers

Post by Rowan McSheen » June 20th, 2022, 5:59 pm

I just use a damp dishcloth and wipe dry with *** DELETE - SPAM *** towel. No cleaning products.
Stu 5' 9" 175 lb (give or take a few) born 1960

User avatar
Rowan McSheen
2k Poster
Posts: 262
Joined: December 13th, 2014, 6:33 pm
Location: Cornwall, UK

Re: Clean or black seat rollers

Post by Rowan McSheen » June 20th, 2022, 6:01 pm

Urgh. I meant paper towel of the type to be found in the room where one prepares one's meals :D
Stu 5' 9" 175 lb (give or take a few) born 1960

User avatar
ampire
6k Poster
Posts: 656
Joined: October 28th, 2017, 7:11 pm

Re: Clean or black seat rollers

Post by ampire » June 20th, 2022, 7:20 pm

I clean the rail, rollers, handle, and seat after each use. I have a cleaning spray bottle with water and a drop or two of liquid dish soap. I use a couple of rags to wipe the parts down. In combination with the diluted dish soap, the elastic waist band from an old pair of boxer shorts seems to remove roller crud easily.

If your rail looks clean and the rollers look clean then I'd start looking at the bearings on the rollers themselves.
M36|5'8"/173CM|146lb/66KG|LWT|MHR 192|RHR 42|2020: 5K 18:52.9 (@1:53.2/500)|C2-D+Slides+EndureRow Seat+NSI Minicell Foam

DavidA
10k Poster
Posts: 1240
Joined: March 16th, 2006, 4:35 pm
Location: Amberley Village, OH
Contact:

Re: Clean or black seat rollers

Post by DavidA » June 21st, 2022, 3:26 pm

Rowan McSheen wrote:
June 20th, 2022, 6:01 pm
Urgh. I meant paper towel of the type to be found in the room where one prepares one's meals :D
:P (love that the 'room which shall not be named', needs to be flagged for spam.)
61 y / 70 kg / 172 cm / 5 kids / 15 grandkids :)
Received my model C erg 18-Dec-1994
my log

Sandeman
Paddler
Posts: 14
Joined: December 13th, 2021, 6:26 am
Location: the Netherlands

Re: Clean or black seat rollers

Post by Sandeman » June 22nd, 2022, 1:40 am

Mine feels te same. I clean it regularly but once it gets a bit of dust/dirt on the rail or roller, I feel it.
It's actually not very bad, just a noticable click when you run over it. I find it annoying (I want the ride to be smooth) so I clean it. Usually just with a dry cloth. Press it on the roller and roll around a bit (mind your fingers!!!!). I don't know if that still works with an older Erg, mine is only 3 months old.
Once the rail and rollers are clean it's as smooth as can be.
1976 male from the Netherlands; 1m98 , 110kg, started RowErging in 03/2022
PB's (yes, I'm still quite slow :D ):
100m=0:18.6, 500m=1:47.5; 1k=4:07.6, 2k=8:25.1, 5k=21:29.3, 6k=26:29.0, 10k=44:18.3, 30min=6,923m

Post Reply