Page 1 of 1
Model D - Clicking noise from dropping rower :-(
Posted: March 15th, 2016, 6:30 pm
by stle57
Help! I'm trying to diagnose this problem, and was on a support call with concept 2 rower. I was thinking about replacing the flywheel or the bearing/axle. Does anyone have experience with this?
I recorded the noise at this link.
https://youtu.be/Jmv1utjO6S0
Thanks for your help!!
Re: Model D - Clicking noise from dropping rower :-(
Posted: March 16th, 2016, 4:28 pm
by jag
I wouldn't order parts until you know what you need. Start by taking off the perforated cover to hopefully see what is making the sound, then continue to disassemble if needed to find the part.
Re: Model D - Clicking noise from dropping rower :-(
Posted: March 16th, 2016, 9:31 pm
by Ombrax
Do Model D's have balance weights on the flywheel? My C does. It might be something as simple as that.
As Jag said, pull the cover and see if there is anything obvious.
Good Luck
Re: Model D - Clicking noise from dropping rower :-(
Posted: October 17th, 2017, 10:20 pm
by Apclare
Just unpacked a new model d and have the same clicking sound happening. Was there ever a fix for this issue? Thanks.
Re: Model D - Clicking noise from dropping rower :-(
Posted: October 18th, 2017, 1:44 am
by Citroen
Apclare wrote:Just unpacked a new model d and have the same clicking sound happening. Was there ever a fix for this issue? Thanks.
Call Concept2 at 1-800 245 5676 and ask them for advice.
Re: Model D - Clicking noise from dropping rower :-(
Posted: October 18th, 2017, 12:35 pm
by Cyclist2
It sounds to me like something loose hitting the same projection on each revolution. Should be easy to spot when the cover is removed, as previously suggested.