csafe_getid_cmd

Post questions and issues with Concept2 PM3 SDK
Post Reply
NdyGen
Paddler
Posts: 5
Joined: September 24th, 2015, 9:30 am

csafe_getid_cmd

Post by NdyGen » November 29th, 2015, 11:02 am

on a PM5 is there a csafe command to get the user id from the inserted usb stick ?

I've tried the csafe_getid_cmd command but this always returns "00000"

for a software project I'm working on it would be great to determine who is currently on the erg e.g. whos stick is inserted in the PM5.

If this is not possible how if the csafe_getid_cmd suposed to be used ?

thanks for you help

gravitylost
Paddler
Posts: 2
Joined: March 6th, 2019, 12:14 pm

Re: csafe_getid_cmd

Post by gravitylost » March 6th, 2019, 12:17 pm

Hi,
I have a PM3 and have the same question. Anyone an answer?
I am reading the PM3 with a raspberry pi.
Thanks

User avatar
Citroen
SpamTeam
Posts: 5584
Joined: March 16th, 2006, 3:28 pm
Location: Basingstoke, UK

Re: csafe_getid_cmd

Post by Citroen » March 6th, 2019, 9:48 pm

If you're using pyrow it's probably better to open a GitHub issue at https://github.com/uvd/PyRow/issues and ask the code developers.

gravitylost
Paddler
Posts: 2
Joined: March 6th, 2019, 12:14 pm

Re: csafe_getid_cmd

Post by gravitylost » March 10th, 2019, 5:37 pm

Thanks for the tip, I just did. Let's see if someone picks it up.

Alex L
Paddler
Posts: 1
Joined: March 13th, 2019, 7:08 am

Re: csafe_getid_cmd

Post by Alex L » March 14th, 2019, 6:48 am

PyRow is no longer maintained. The project related to PyRow is no longer active and the developers that were working on PyRow and systems that integrate with it are no longer with the same company.

User avatar
Citroen
SpamTeam
Posts: 5584
Joined: March 16th, 2006, 3:28 pm
Location: Basingstoke, UK

Re: csafe_getid_cmd

Post by Citroen » March 15th, 2019, 6:41 am

Fork it and write your own fix.

Post Reply