Concept2 Forum

I noticed that some managed to install [SkiGrip](https://exxentric.com/store/kpulley-cat ... rip-elite/)-like handles on SkiErg. Where do I buy those (preferably EU but US shops also work)? Your experience using them?

The elite sometimes use them on SkiErg (see e.g. [here](https://www.youtube.com/watch?v=tTEQNv6n3j8)).

Pretty nice, although they may not be allowed for records? The site you linked ships worlwide.

"Standard Record Requirements
All world and national records must be:
Completed on a Concept2 RowErg (with or without Slides), a Dynamic RowErg or a SkiErg. This equipment must sit on a level surface. Modifications to the machine that alter its performance are not allowed. Please check with Concept2 if you are unsure."

Xc handles don't alter machine perfomance.
Skierg Marathon WR are done with leki ski handles.

I use some random xc ski handles with Kv+ elite straps, much much better than green handles.

Dpoleit89 wrote: ↑

February 1st, 2025, 4:18 am

Xc handles don't alter machine perfomance.
Skierg Marathon WR are done with leki ski handles.

I use some random xc ski handles with Kv+ elite straps, much much better than green handles.

Well, I shall have to definitely try them. Thanks!

I use these:
https://concept2sverige.se/products/grip-adapter
Supergood and easy to use. Simple to bring and use on any Skierg with the green handles.

Dpoleit89 wrote: ↑

February 1st, 2025, 4:18 am

Xc handles don't alter machine perfomance.
Skierg Marathon WR are done with leki ski handles.

I use some random xc ski handles with Kv+ elite straps, much much better than green handles.

Any picture and/or links to them ? How the handles are installed, how the straps are fixed etc.

I kind of dislike the stock handles too.

HornetMaX wrote: ↑

February 21st, 2025, 12:01 pm

Dpoleit89 wrote: ↑

February 1st, 2025, 4:18 am

Xc handles don't alter machine perfomance.
Skierg Marathon WR are done with leki ski handles.

I use some random xc ski handles with Kv+ elite straps, much much better than green handles.

Any picture and/or links to them ? How the handles are installed, how the straps are fixed etc.

I kind of dislike the stock handles too.

Thx Dpoleit89. I'll try to find something similar, it looks reasonably cheap to give it a try.

jorgensor wrote: ↑

February 19th, 2025, 11:49 pm

I use these:
https://concept2sverige.se/products/grip-adapter
Supergood and easy to use. Simple to bring and use on any Skierg with the green handles.

Interesting, thanks. Do you have a few picture of them (the removable pin part and the hole it goes into, in particular) ?
I don't see these sold on any other site than then one you gave (Sweden), maybe I'll find somebody to 3d print something similar.

Hi all, just bought a random pair of nordic ski handles & straps (the first cheap thing that was easily available here in france) and I've installed like below. I'll test them over the weekend.

Tried them today (well, just 2 easy 10' as warmup and cooldown of a rowing session).
Work nicely, I find the straps a bit stiff on the hands but maybe it's a matter of habit and/or break-in.
I had to change slightly how the cord loops around them, as below.

I'm a bit concerned about the cord rubbing against the handle and the strap and ultimately wearing too quickly. Granted, cord is cheap but changing it is a pain.

If needed, I'll try to wrap the cord in something where it rubs: insulation/sheating from an electrical wire ? maybe a C shaped half-pipe piece of plastic (like 3d printed) ?

Anyway, longer testing this weekend to see if there's any real improvement over stock handles.

Tried them on a 2x30', I like them.

To avoid having the skierg cord rub too much against the straps I added the sheating of a power cable, held in place with some duct tape.
But I'm realizing right now that the swedish concept2 site says you can simply add a carabineer to the cord and to the strap loop exiting from the top of the handle, doh than would be easier & better. Will do.



But I'll also give some homework to a friend with a 3d printer, the adaptor to the stock handles is interesting too.