Error after complete workout

Not sure where you should be posting? Put it here.
Post Reply
baobeii
Paddler
Posts: 3
Joined: October 31st, 2019, 1:08 pm

Error after complete workout

Post by baobeii » November 7th, 2019, 4:08 am

Hi,

So PM5 is connected to ergdata... at the end of a workout, if I press the menu button on PM5 OR finish workout in ergdata, I get this appear:

https://pasteboard.co/IFyroNc.jpg

baobeii
Paddler
Posts: 3
Joined: October 31st, 2019, 1:08 pm

Re: Error after complete workout

Post by baobeii » November 7th, 2019, 6:41 am

Factory reset of the PM5 fixed it..

odd, it's a brand new machine!

User avatar
Citroen
SpamTeam
Posts: 5882
Joined: March 16th, 2006, 3:28 pm
Location: Basingstoke, UK

Re: Error after complete workout

Post by Citroen » November 8th, 2019, 3:48 am

Check the firmware level. If it's not Version 166 (or 29) then run a firmware upgrade.

If it is Version 166 (or 29) then send your screen shot to rowing@concept2.com.

Post Reply